Assembling Your Breville Die Cast Programmable Espresso Machine - Breville BES820XL Manuel

ASSEMBLINg YOuR BREVILLE DIE CAST pROgRAMMABLE ESpRESSO MACHINE

STEp 1
New photo of machine showing
water tank being removed
Insert the storage tray into the base of
the machine and slide towards the back
wall. The storage tray conveniently stores
the cleaning tool, stainless steel filters,
measuring/tamping spoon and Quick
Start Guide when not in use, so they are
not misplaced.
12
STEp 2
Insert the 'Empty Me!' full indicator into
position in the drip tray and place the
stainless steel grid on top. Slide the
drip tray into position in the base of the
machine in front of the storage tray.
STEp 3
Slide the water tank over the drip tray
and into the front opening of the machine
and into position above the storage tray.
Ensure the water tank aligns flush with the
sides of the machine.
NOTE: Before each use it is
recommended to complete a water
flushing operation, without ground
coffee, to ensure that all internal
piping has been preheated. Refer
to Steps 1 and 4 in 'Operating your
Espresso Machine', page 14