Spypoint 2N1 Manuel D'utilisation page 6

10
DISTANCE
Turn the dial to the right to increase distance.
The DI dial (placed on the side of the camera) can
STANCE
adjust the sensitivity of the detector.
with a detector sensitive to infrared. The system detects only heat
source in motion. The greater the mass of heat, more sensitive is the
Range of detector is between 5 and 50 feet.
system.
to adjust the distance is to set the camera in
MODE). Make sure to have the least possible objects in front of the
camera during the positioning. This prevents pictures being taken
by the camera when oriented towards the sun while an object moves
in front of the camera (eg. a branch)
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn the camera OFF and connect the USB cable (supplied)
from the camera to your computer. The computer will recognize
the camera and install the software itself. Click on "My
Computer" and select "Removable Disk". Then click "DCIM"
and "100DSCIM" to find all your photos and videos.
Taking the SD card out of the camera and inserting it into the
computer port will achieve same results. If no SD reader is built
into the computer, a multi-card reader RD25-1 (sold separately)
can be used.
The camera is equipped
The best way
SET/TE ST mode (see
1