Unpacking; Installation; List Of Items Supplied - KERN EW Série Mode D'emploi

5.2 Unpacking

Carefully remove the balance from its packaging, remove the plastic wrapping and
position the balance in its intended working location.

5.2.1 Installation

Use the foot screws to level the balance until the air bubble in the bubble level is in
the prescribed circle.

5.2.2 List of items supplied

Standard accessories:
(1) Balance
(3) Weighing plate bracket
(5) Interface connector set
(excl. EWB models)
(7) Mains adaptor
EW/EG-N/EWB-e-1627
(2) Weighing plate
(4) Windbreak
(excl. EWB models)
(6) Operating instructions
15