Interface Description; Data Output; Data Transmission Formats; Algebraic Sign - KERN EW Série Mode D'emploi

8.3 Interface description

The output format, output control, transfer speed and parity bit can be set following
the choice of a certain operating mode. The various possibilities are described in
chap. 7.2.2 "Parameters for the serial interface ".

8.4 Data Output

8.4.1 Data Transmission Formats

By selecting the corresponding function at your balance one of the two following data
formats can be set:
• 6-digit data format
(excl. model KERN EW-120-4NM)
Consisting of 14 words including the final signal; CR=0DH, LF=0AH (CR=return
travel / LF=line feed)
1 2 3
P1 D1 D2
• 7-digit data format
1 2 3
P1 D1 D2 D3
Note: The 7-digit format is identical with the 6-digit format except for the addition-
al signal D8.

8.4.2 Algebraic sign

P 1 = 1 word
P 1
+
-
sp

8.4.3 Data

D 1 to D 7 7 words with 6-digit format (excl. model KERN EW-120-4NM)
D 1 to D 8 8 words with 7-digit format
D * Code
0 - 9 30 H – 39 H
. (Point) 2 EH
Sp 20 H
52
4 5 6 7
D3 D4 D5 D6
4 5 6 7
D4 D5 D6
Code
2 B H
2 D H
20 H
Data 0 to 9 (max. 6 characters in 6-type format)
Decimal point, position not fixed
Space character, leading zero oppressed
8 9 10 11
D7 U1 U2 S1
8 9 10 11
D7 D8 U1 U2
Meaning
Data are 0 or positive
Data are negative
Date are 0 or positive
Meaning
EW/EG-N/EWB-e-1627
12 13 14
S2 CR LF
12 13 14 15
S1 S2 CR LF