Battery exchange (fig. III)
If the battery symbol [15] is displayed, the supplied
voltage is too low for operation.
Exchange the battery as follows.
Open the battery cover [5].
Remove the battery [20] from the device and
■
insert a new battery (item no. 0827 05).
Close the battery cover [5].
■
Maintenance / cleaning
Note
Do not use any solvents for cleaning
the lens.
The device may NOT be dipped in
water.
Cleaning the lens:
Remove loose parts using clean, compressed air.
■
Remove remaining contamination carefully with
■
a soft brush.
Wipe off the surface carefully with moist cotton
■
wool. The cotton wool can be moistened with
water.
Cleaning the housing:
Clean the housing with soap solution and
■
sponge or a soft cloth.
Disclaimer
The information in these operating instructions can
be changed without prior notice. Würth does not
accept any liability for direct, indirect, accidentally
or other damages or consequential damages which
result from the usage or the application of the infor-
mation in these operating instructions.
14
All manuals and user guides at all-guides.com
Environmental protection
Do not dispose of the device with
domestic waste. Have the device
disposed of by an authorised waste
management company or your
municipal waste management
organisation.
Adhere to the applicable regula-
tions. In case of doubt contact your waste manage-
ment organisation. Recycle all packaging material
in an environmentally friendly manner. Batteries may
not be disposed of with domestic waste. Hand in
used batteries at your supplier or at a battery col-
lecting point.
Declaration of Conformity
We herewith declare that this product conforms with
the following standards and directives:
Standards
• DIN EN 61326 -1:2006
• DIN EN 61326-2 -1:2006
in accordance with the regulations stipulated in the
directives:
EC directive
• 2004/108/EC
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PFW
General Manager
Adolf Würth GmbH & Co. KG
Künzelsau: 11.07.2012
General Manager