Important Safety Notes - Martin Yale intimus 702 Instructions D'opération

GB

IMPORTANT SAFETY NOTES

<< The machine may not be operated by more
than one person at any given time!
The machine was designed for safe operation
by "one person only".
<< During the shredding process no other
work may be performed on the machine
(for example cleaning, etc.).
<< Keep children away from the machine.
This machine's design and safety concept
are based on adult dimensions (feeder route,
safety cut-off switches, etc.) to ensure that it
can be operated safely by adults only.
<< Repairs may only be performed by trained
personnel.
CONTROLS:
1 = Pushbutton switch „ready" (fig. 1)
Depress this switch to start the machine or
to stop the machine.
2 = Light barrier (forward operation) (fig. 2)
The shredding operation is started as soon
as a sheet of paper passes through the feed
slot.
3 = Pushbutton switch „reverse" (fig. 1)
Pressing this button activates the cutting
mechanism into reverse.
4 = Pilot lamp „ready" (fig. 1)
Lights when the pushbutton switch (1) is
operated.
5 4 6
fig. 1
<< Never insert fingers into opening.
<< In case of danger switch the ma-
<< Always unplug the machine from
5 = Pilot lamp
„receptacle full" / „door open" (fig. 1)
Lights when
a) the receptacle is full and needs to be
emptied. At the same time the machine
switches off automatically.
b) the door is not closed. The machine then
switches off automatically and it cannot be
started as long as the door is open.
6 = Pilot lamp „paper jam" (fig. 1)
Lights when too much paper is fed to the
cutters. The cutting system blocks and stops.
The motor is switched off.
FEEDING THE PAPER:
- Turn machine on with pushbutton switch (1)
(fig. 1). Pilot lamp lights up (4) (fig. 1).
- Feed paper through the inlet guide to the cutting
system.
- Machine switches automatically to forward
and draws paper in. The machine switches off
automatically after shredding.
3
1
<< Keep all loose articles of
clothing, ties, jewelery,
long hair or other loose
objects away from ope-
ning, injury may result!
Serious injury may result!
chine off with the mains switch,
or with the emergency switch, or
unplug the machine.
the mains power supply before
opening the machine.
OPERATION
4
INITIATION
SCOPE OF APPLICATION:
The document shredder intimus 702 is a machine
for the destruction of common written material.
The unit should only be fed with
paper!
Shredding other types of materials can
cause injuries (e.g. by splinters of hard
materials) or may damage the shredder
(e.g. destruction of the cutting system).
Exception: Single CD's or 3.5" compu-
ter diskettes can also be shredded with
3,8mm, 5,8mm, 4x46mm, 1,9x15mm
models.
INSTALLATION:
- Unpack and set machine upright.
- Place plastic sack into the receptacle.
- Plug in the machine (for instructions for the
necessary precautions see „TECHNICAL
DATA".
The air vents in the housing are ne-
cessary for cooling and may not be
covered or closed!
The mains connection at the machine
must be freely accessible!
Only operate the machine in enclosed
rooms at temperatures between 10°C
and 25°C!
Never feed the shredder with a quantity
of paper exceeding the maximum indi-
cated in the technical details.
Should the machine be overfed, follow the
instructions under „PAPER JAM".
EMPTYING THE RECEPTACLE:
When the receptacle is full, the machine turns off
automatically. Empty the receptacle as follows:
- Open door. Remove the full sack and dispose
of contents.
- PLace empty sack into receptacle and close
door. The pilot lamp (5) (fig. 1) goes off.
Note: The machine will only run with closed
door!
2
fig. 2