Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.3
Receiving a call
When the handset rings, press
If the hand-set is on the base when the telephone rings, you just need to pick up the hand-
set to answer the call (if the option autoanswer is activated: See 4.9. Automatic answer).
3.4
Making an external call
3.4.1 Normal:
1.
Press
2.
Enter telephone number
3.4.2 Block dialling:
1.
Dial your correspondents number
2.
Press
To correct a number use the
3.5
Making an internal call
1.
Press INT
2.
Enter the number of the internal handset (1 to 5)
3.6
Internal call transfer
When you want to transfer an external call to another handset:
1.
During a conversation, press INT
2.
Select the number of the internal handset, the external caller is put on hold.
3.
When the other handset picks up, press
If the internal corespondent does not pick-up, press INT again to reconnect to the external
caller on line.
3.7
Conference Call
Only possible when more then one handset are registered to the base!!
You can converse simultaneously with an internal correspondent and an external
correspondent.
When you are on line with an external correspondent:
1.
Press INT
2.
Enter the number of the internal handset that you want to call
3.
When the internal correspondent picks- up, press and hold #
4.
If the internal correspondent does not answer, press INT again to reconnect to the
external correspondent on-line.
3.8
Display of call duration
The call duration is displayed after 15 seconds, in minutes - seconds.
At the end of each call, the total call duration is displayed for 5 seconds.
TOPCOM OGATECH OG-T700/Twin/Triple/Quattro
All manuals and user guides at all-guides.com
to answer. You are then connected to your correspondent.
key to delete an entered digit
TOPCOM OGATECH OG-T700/Twin/Triple/Quattro
to hang up and transfer the call.
13
Publicité
Table des Matières
