Call Transfer And Intercom Between Two Handsets; Call Transfer And Conference Call During An External Call; Internal Call (Intercom) - Topcom BUTLER E300 Manuel D'utilisateur

Topcom Butler E300/Twin/Triple/Quattro
9

Call transfer and Intercom between two handsets

These functions only work when more then one handset (like a Twin/Triple/
Quattro version) is registered to the base!
9.1

Call transfer and conference call during an external call

During an external call, press the INT key followed by the number (1-4) of the other handset.
The other handset will start to ring:
– When the other handset takes the line you can talk internally.
If you hang up, the external line will be connected with the other handset.
If you press and hold the INT key for 3 seconds you can talk with the 2nd handset
and external line at the same time (conference call)
– Or press the INT key again to return to the external call.
Press ON-hook button
9.2

Internal call (intercom)

• In standby press the INT key followed by the number (1-4) of the other handset.
• The other handset will start to ring. You can stop the ringing by pressing the ON-hook
button .
• If the other handset answers the call by pressing the OFF-hook button
internally.
• Press the ON-hook button
10 Reset of the phone
This will undo all changes and set back all default settings (ringer volume, ringer melody,
etc...).
Press Menu button
press OK Enter the pin code (0000) and press
Default handset settings are:
Handset volume
Handset melody
Flash time
Dial mode
AutoAnswer
Keypad tone
Receiver volume
Pin code
ECO mode
All memories (redial, phonebook, call log,...) and handset name will not be
erased!
12
All manuals and user guides at all-guides.com
to end the call.
to end the call.
Scroll to 'System' and press
3
3
Recall 1
Tone
ON
ON
2
'0000'
OFF
you can talk
Scroll to 'RESET' and
The unit will go back to standby.
Topcom Butler E300/Twin/Triple/Quattro