Char-Griller AKORN 06620 Guide Du Propriétaire page 9

Step 1
Place GRILL BODY upside down and install LEG BRACKETS with three (3) ½ inch hex bolts
each. Next install LEGS (3) with two (2) ½ inch hex bolts and two 1/4 inch lock washers each into
LEG BRACKETS. DO Not Tighten Bolts Until After Step #3. Screw CASTER onto rear leg, lock
CASTER before tightening. Make Sure the leg with the caster is in the back and wheel support
braces on the front legs are facing outward.
Axle
Leg Bracket
Grill Body
Step 2
Attach BOTTOM SHELF to LEGS with five 1/2 inch hex bolts and lock washers.
Step 3
Insert AXLE through front LEGS and BOTTOM SHELF. Tighten all bolts.
Bottom Shelf
Caster
8" Wheel
Leg Bracket
B-3