Mounting The Outdoor Unit - Midea COOLIX MSC2-12HRDN1-QE Instructions D'installation

Upper hook
Lower hook
Electrical connecting cable
Damping material
36
All manuals and user guides at all-guides.com
INSTALLATION FOR QUICK-CONNECT LINES
pipe and insulation
· Wrap tape around the connecting cable, the condensation drainage hose and coolant lines evenly (see illustration).
· The condensate from the indoor unit will flow to the collection tank and drain through the hose. Do not insert anything
else in the container.
Indoor unit
Pipe space
Copper pipe
Insulation
Condensation drainage hose
Copper pipe

mounting the outdooR unit

Preparations
· Install the outdoor unit on a solid surface to avoid high noise levels or vibration.
· Select the direction of the air outlet so that the discharge air flow is not blocked.
· If the installation location is located in an area that is exposed to extreme winds, such as at the ocean, make sure that
the fan is functioning properly and mount the appliance along the wall or use a safety plate. In especially windy areas,
you must mount the appliance so that air cannot penetrate the unit.
· When hanging the appliance, make sure that the mounts comply with the specifications indicated in the mounting
diagram. The mounting wall should be made of concrete, brick, or similar construction. Utilise additional supports for
strengthening. The connection between the mount and wall or mount and outdoor unit should thereby be solid, stable,
and dependable.
· Make sure that the discharged air is not blocked.