Switching The Flash Unit On And Off; Automatic Unit Shut-Off / Auto Off - Metz MECABLITZ 44 AF-1 digital Mode D'emploi

The rechargeable batteries/batteries are
empty or flat when the flash delay exceeds
60 seconds (interval between triggering a
full output flash, e.g. in M, and when the
flash readiness indicator is relit).
• Switch off the flash unit by pressing
the button until all LED displays
are off.
• Remove the flash device from the came-
ra and slide the battery cover
downwards.
• Insert the batteries and slide the battery
cover back into place.
Please ensure the batteries/rechargeable
batteries are inserted correctly by chek-
king against the symbols in the battery
compartment. Incorrect insertion can ter-
minally damage the unit. Risk of explosi-
on in event of improper use of batteries.
Always replace all batteries with the
same high-quality brand batteries of the
same capacity. Used batteries and
rechargeable batteries should not be dis-
posed of with domestic waste. Do your
bit for the environment and dispose of
used batteries/rechargeable batteries at
designated collections points.
3.3 Switching the flash unit
on and off
• Switch on the flash unit by pressing the
button
last operating mode and the LED display
will light up accordingly.
M SL
The button
mode. Switch off the flash unit by pressing
the button
TTL
are off.
In the event that the flash unit will not
be required for a longer period of
time, we recommend switching the unit
off by pressing the
removing the power supply (batteries,
rechargeable batteries).
3.4 Automatic unit
shut-off / Auto OFF
The flash unit is configured so that
10 minutes after -
• switching on,
• triggering the flash,
• lightly depressing the camera shutter
release,
The unit will revert to the
flashes red in standby
until all LED displays
button and
M SL
TTL
+
k
89