Technical Data - Metz MECABLITZ 44 AF-1 digital Mode D'emploi

highly reflective areas. The metering
system of the camera or flash unit is
deceived as a result.
Set a positive manual flash exposure
correction, e.g., +1 EV.
The shots are too bright.
• When taking close-ups, make sure to
preserve specific minimum illumination
ranges to avoid overexposure. The mini-
mum distance from the subject should
represent at least 10% of the maximum
range.

15 Technical data

Max. guide numbers at ISO 100/21°,
zoom 105 mm:
k
In the metric system:
In the imperial system:
Flash modes:
Canon:
E-TTL, E-TTL II, Manuel M, Remote slave
mode.
Nikon:
i-TTL, i-TTL-BL, Manuel M, Remote slave
mode.
Olympus:
TTL, Manuel M, Remote slave mode.
104
44
144
Pentax:
P-TTL, Manuel M, Remote slave mode.
Samsung:
A-TTL, Manuel M
Sony:
Preflash TTL, ADI metering, Manuel M,
remote slave mode.
Manual partial light output levels:
P1/1; P1/2; P1/8; P1/64
Flash durations see table 2, page 158):
Colour temperature:
approx. 5600 K
Synchronisation:
low-voltage ignition
Flash numbers:
approx. 220 with high-performance alka-
li-magnesium batteries
approx. 270 with NiMH rechargeable
batteries (2100 mAh)
approx. 450 with lithium batteries
(each with full light output)
Flash delay, each with full light output:
approx. 3-4 seconds
Motor zoom main reflector illumination:
from 24mm (135 format 24 x 36).
from 12mm with integrated wide-angle
diffuser (135 format 12 x 36).