1. Intended use
The laser is intended for generating laser light effects in lightshow equipment and is controlled by a built-in DMX controller or
an external DMX controller.
The laser is intended for use in professional applications only.
Connect the DMX port only to a suitable DMX controller or to other DMX devices.
Make sure to follow all safety regulations and standards regarding the use of lasers.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided under all
circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the product for purposes
other than those described above, the product may be damaged. In addition, improper use can cause hazards such as short
circuiting, fire, electric shock etc. Read the instructions carefully and keep them. Make this product available to third parties
only together with its operating instructions.
Caution!
Due to the high laser power of the product there is a high risk of damage to health in case safety
precautions are not adhered to.
For that reason, read the complete operating instructions thoroughly before you install and operate the
product and make sure to follow all safety precautions therein.
2. Scope of delivery
• Laser
• Power cable
• 2 x keys
• Plug connector for safety interlock
• Operating instructions
3. Explanation of symbols
The lightning symbol indicates a health hazard, e.g. danger of an electrical shock. The device contains no parts
that require servicing by the user. Therefore, never open the device.
The exclamation mark indicates important notes in these operating instructions that should strictly be observed.
The arrow symbol indicates special information and advice on operating the device.
Only use the product in dry and secured areas.
This symbol determines the minimum distance to illuminated surfaces.
0.5m
All manuals and user guides at all-guides.com
23