MC Crypt GLPS6-RGY Mode D'emploi page 36

11. Operation
CH 1 = 225-255
CH 2 000-255
000-127
128-169
CH 3
zoom
170-209
210-255
000-127
CH 4
Y axis 128-191
rolling
192-255
000-127
CH 5
X axis 128-191
rolling
192-255
000-127
CH 6
Z axis 128-191
rotation
192-255
000-127
CH 7
X axis 128-191
movement
192-255
000-127
CH 8
Y axis 128-191
movement
192-255
000-015
016-031
032-047
CH 9
colour
048-063
064-160
161-255
e) Slave operation
In this operating mode, the controller of the connected master device controls the slave devices. That means that each slave
device synchronously reproduces the laser patterns of the master device.
Perform the connection as described earlier under "Setting up a master-slave chain".
• Press FUNC button repeatedly until SLA flashes in the display.
• Confirm your selection by pressing ENTER.
• The laser then operates in slave mode and is synchronously controlled by the controller of the connected master device.
36
All manuals and user guides at all-guides.com
32 grating effects
Zoom effect (100 % → 5 %)
Zoom-in effect
Zoom-out effect
Combined zoom-in/out effect
0 - 359º
Clockwise rolling
Anti-clockwise rolling
0 - 359º
Clockwise rolling
Anti-clockwise rolling
0 - 359º
Clockwise rotation
Anti-clockwise rotation
128 different fixed positions on X axis
Clockwise movement
Anti-clockwise movement
128 different fixed positions on Y axis
Clockwise movement
Anti-clockwise movement
Original colour
Colour 1
Colour 2
Colour 3
Single colour, alternating speeds
Mixed colours, alternating speeds