Intended Use; Explanation Of Symbols - MC Crypt DL-1114S Notice D'emploi

2. Intended Use

The LED Effect Light is used to generate light effects in light show equipment, party rooms, etc. and is controlled by
the built-in controller or an external DMX controller.
The product is only approved for connection to 100-240 V/50/60 Hz alternating voltage.
The DMX connection must only be connected to suitable DMX controllers.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit, fire, electric
shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.
This product complies with the statutory national and European requirements. All company names and product names
are trademarks of their respective owners. All rights reserved.
Observe all safety and assembly notes in these operating instructions!

3. Explanation of Symbols

This symbol on the device indicates that the user must read these operating instructions before
using the product and observe them during operation.
The symbol with a lightning bolt in a triangle is used where there is a health hazard, e.g. from electric
shock. The device contains no parts that require servicing by the user. Therefore, never open the
device.
The exclamation mark indicates important notes in these operating instructions that must be strictly
observed.
The arrow symbol indicates special advice and operating information.
This symbol indicates the minimum distance to the illuminated surfaces.
...m
18