Wacker Neuson RD 7 Notice D'emploi page 69

Masquer les pouces Voir aussi pour RD 7:
Table des Matières

Publicité

Walk around your machine once more just prior to
mounting it – checking for people and objects that
might be in the way – then MOUNT PROPERLY
USING STEPS AND HANDHOLDS PROVIDED.
Always use seat belts if your machine is equipped
with a ROPS.
Just before starting, check all controls ... such as
forward and reverse, steering, transmission and
throttle to be sure they are in the correct start-up
position. (FIG. 13) The parking brake should be
applied during the start-up operation.
Check for proper functioning of all operating and
shut-down controls.
START CORRECTLY
Know the PROPER starting procedure for your
machine. Follow the manufacturer's operation
manual ... to the letter.
Then, start your engine.
KE40246P2
6/9/05
3:17 PM
START SAFELY
IMMEDIATELY AFTER STARTING
THE ENGINE ...
Observe gauges, instruments, and warning lights to
ensure that they are functioning and their readings
are within the normal operating range. (FIG. 14)
Be sure work area is safe for test operation of the
various controls and attachments.
Operate all controls: make certain they operate
properly, and "feel" right. Accustom yourself to the
"feel" of your machine.
Listen for any unusual noises; smell for any unusual
odors; look for any signs of trouble.
Check all warning and safety devices and
indicators.
If safety-related defects or malfunctions are
detected, shut down the machine. Correct it, or
notify your supervisor. DO NOT OPERATE
UNTIL CORRECTED.
Check operation of service and parking brakes on
level ground if possible.
Check service brakes (including hydrostatic brakes,
if so equipped) in both forward and reverse
operation (FIG. 15) ACCORDING TO THE
MANUFACTURERS INSTRUCTIONS.
16
All manuals and user guides at all-guides.com
Page 16
If an unsafe condition cannot be remedied
immediately, notify your supervisor and tag the
machine on the start switch and/or other
appropriate, prominent location. (See page 28 for
Lockout/Tagout procedure.) No machine
should be operated if any part is not in safe
operating condition. Make certain that any unsafe
condition has been satisfactorily remedied.
START SAFELY
15

Publicité

Table des Matières
loading

Table des Matières