Self-Test Diagnostics; Connecting The Led; Fig. 4 - Thermostat Terminals; Fig. 5 - Relay Terminals - Norcold DE0041 Serie Manuel D'entretien

Fig. 4 - Thermostat Terminals

D
NC NO

Fig. 5 - Relay Terminals

No. Description
A Thermostat Terminal #3
B
Thermostat Terminal #4
C
Thermostat Terminal #6
D
Relay Terminal NO
E Relay Terminal COM

Self-Test Diagnostics

The unit's control module is equipped with a self-test diagnostic
function which can be read using a light emitting diode (LED). To
access the error codes displayed in the control module, you will
need the items in Fig. 2. Refer to Fig. 3 - Fig. 3.5 for diagnostic
instructions.
A1
A2

Fig. 6 - LED and connectors

Reference Description
A (1x) 10 mA LED with wire leads
A1 (1x) 1/4 inch push-on female connectors (Black)
A2 (1x) 1/4 inch push-on female connectors (Red)
B 1/4 inch adapter with one (1) female and two (2) male connections
C 12 VDC Input Wire
D 12 VDC Terminal "+"
E Control Module
F Terminal "D"
Series DE/EV0041, Series DE/EV0061, DC0061
C
B
A
E
COM
A
B

Connecting the LED

Refer to Fig. 6, and Figs. 7.1-7.5
1. Attach the two (2) female blade connectors
wire leads of the LED
1 1
A

Fig. 7.1 - Attach Blade Connectors

2. On the control module
from the terminal
(C) "+"
2 2

Fig. 7.2 - Disconnect 12 VDC

3. Connect the blade adapter (
3 3
B

Fig. 7.3 - Connect Blade Adapter.

4. Connect the black LED wire
the red LED wire (A2)
10
(A1, A2)
(A) .
A2
A1
(E) , disconnect the 12 VDC input wire
.
(D)
D
_
C
12/24 Vdc
+
+
F
D
C
E
P
T
) to the ( ) terminal.
B "+" D
_
D
12/24 Vdc
+
+
F
D
C
P
T
(A1) to terminal "D"
to the one side of blade (B)
to the
(F) ; connect
.
www.norcold.com