Do A Test Of The Gas Safety Valve; Display Codes - Norcold NX61 Manuel D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Select the temperature setting.
- Push and hold the TEMPERATURE SET button [32] to scroll through the temperature settings, one after the other (See Art02393).
- When the desired temperature indicator(s) comes on, release the TEMPERATURE SET button.
- Or push and release the TEMPERATURE SET button again and again to change the temperature settings, one at a time.
- As you change the temperature setting, the applicable temperature indicator(s) will come on.
- Select one of three (3) temperature settings:
Cold
Colder
Coldest

Do a test of the gas safety valve:

1. Start up the refrigerator in gas mode operation.
2. Open the lower intake vent.
3. Remove one wire from the solenoid of the gas safety valve at the rear of the refrigerator.
4. Within 30 seconds, the flame should extinguish. This means that the gas safety valve is operating correctly.
5. Put the wire back on the solenoid of the gas safety valve.
6. Close the lower intake vent.
Shut down:
To shut down the refrigerator, push and hold the POWER ON/OFF button for one second and then release.

Display Codes

Indicators and Status
All indicators are off, except the green
POWER ON indicator.
Green POWER ON indicator is on.
AUTO indicator is on.
AC indicator is on.
Green POWER ON indicator is on.
AUTO indicator is on.
GAS indicator is on.
Green POWER ON indicator is on.
AC indicator is on.
Green POWER ON indicator is on.
GAS indicator is on.
One temperature indicator comes on.
Two temperature indicators come on.
Three temperature indicators come on.
The controls have been inactive for more than 10 seconds and are in a "sleep"
mode. Press and release either the MODE or the TEMPERATURE SET button
to "wake" the controls for ten (10) seconds.
The refrigerator is operating in Auto mode and is using AC electric as the power
source.
The refrigerator is operating in Auto mode and is using propane gas as the power
source.
The refrigerator is operating in Manual AC electric mode .
The refrigerator is operating in Manual propane gas mode.
Meaning
Installation Manual 19

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Nx81

Table des Matières