Maintenance; Empty The Dust Cup; Cleaning Filters; Replacement Filters - shark DuoClean HZ500EU Serie Instructions

MAINTENANCE

IMPORTANT: Unplug the vacuum before performing any maintenance.
EMPTYING THE DUST CUP
Empty the dust cup each time you vacuum and periodically during cleaning, when debris in
the dust cup reaches the MAX fill line.
Press the wand release button and lift the
handheld vacuum off the wand.
Empty
Empty
Button
Hold the dust cup over the bin. Press the
Empty button and pull the dust cup open.
44 sharkclean.eu
Release
Button
To remove the dust cup from the handheld
vacuum, squeeze the two Dust Cup Release
buttons at the same time and pull out the dust
cup.
To reinsert the dust cup back into the handvac,
angle the tip first and then push up until it
clicks into place.
MAINTENANCE
IMPORTANT: Unplug the vacuum before performing any maintenance.

CLEANING FILTERS

Perform regular maintenance on the filters to keep your vacuum's suction power optimal.
IMPORTANT: To prevent damage, rinse filters with water ONLY. DO NOT use soap. Allow filters
to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into
electric parts.
Pre-Motor
Filters
Release
Button
PRE-MOTOR FILTERS
To access the pre-motor filters, press and
pull both filter access tabs on the dust cup
to remove the filter holder. The Pre-Motor
Filters should be washed twice a month.

REPLACEMENT FILTERS

NOTE: For replacement filters please visit sharkclean.eu
Release
Button
Post-Motor Filter
Acces
POST-MOTOR FILTER
Remove the filter cover on the top of the
handvac to access the post-motor filter. The
Post-Motor Filter should be washed once
every 9 months.
sharkclean.eu 45