Maintenance; Emptying The Dust Cup - shark LIFT-AWAY NV390 Série Manuel D'instructions

MAINTENANCE

To keep your vacuum's
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing.
Hand wash with
water only to prevent
damage from
cleaning chemicals.
Allow ALL filters
to dry completely
before replacing
in the vacuum to
prevent liquid from
being drawn into
electric parts.
IMPORTANT: Do not use
soap when cleaning the
HEPA filter.
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFF350
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF350
Clean once a year.
17
1-800-798-7398
STEP 1

EMPTYING THE DUST CUP

To remove the dust cup,
1
undo the latches on the
sides of the dust cup
by lifting them up and
outwards.
STEP 2
2 Hold dust cup over a
trash bin and press the
empty-release latch on the
bottom.