Storage And Maintenance; Important - shark UV540CCO Manuel D'instructions

Storage and Maintenance

STORE YOUR VACUUM SAFELY
1
Convert your vacuum back to upright vac mode.
2
Rotate the upper quick cord release to its upright position
and coil the power cord loosely around the two clips. Clip
the plug onto the cord to secure. (Fig. 17)
3
Store the dusting brush and the crevice tool on the mounts
on the accessory holder.
4
Store your vacuum cleaner safely in a cool dry area where
it will not be a hazard, will not get damaged and will not
cause damage to anyone or anything.
NOTE: Empty dust cup after cleaning and prior to storing.
(See "Maintenance" section for instructions.)
12 1-800-798-7398
Quick
Cord Release
Lower Cord
Storage Clip
Fig. 17
To reduce the risk of electric shock, unplug the unit before
performing any cleaning, maintenance, or troubleshooting
checks.
Reassemble all parts securely before operating vacuum.
DO NOT operate the vacuum without the filters and dust
cup in place.
DO NOT operate the vacuum with WET filters.
IMPORTANT: Make sure all filters are completely dry
before inserting back into vacuum.
WARNING: Never insert sharp objects into any opening to
clear an obstruction.
IMPORTANT: Damages caused while clearing or
attempting to clear blockages are not covered under your
product's limited warranty.