Maintenance; Emptying The Dust Cup; Cleaning The Filters - shark APEX duo clean Powered Lift-Away AX952 Serie Instructions

MAINTENANCE

To keep your vacuum's
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
WARNING: To reduce
the risk of shock and
unintended operation,
turn off power and
unplug unit before
servicing.
Hand wash only with
water to prevent
damage from cleaning
chemicals. Allow
ALL filters to air-dry
completely before
replacing them in the
vacuum to prevent
liquid from being drawn
into electric parts.
IMPORTANT: Do not use
soap when cleaning the
filters. Do not scrub HEPA
filter material.

EMPTYING THE DUST CUP

1
Press down on Dust Cup
RECOMMENDED
Release button and lift
FILTER CLEANING
dust cup off pod.
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFF680
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF680
Clean once a year.
19
1-800-798-7398
STEP 1 STEP 2
2 Hold dust cup over a trash
bin and press the latch
on the bottom of the dust
cup to empty it.
STEP 3

CLEANING THE FILTERS

1 Pre-Motor
3 Press top Dust Cup Empty
(foam and felt):
latch to access dust
With the dust cup
screen and remove built-
up debris as required. removed, take out the
foam and felt filters, and
rinse with water. Tap loose
dirt off filters between
washes as needed.
FOAM FILTER
FILTER FRAME
FELT FILTER
Filter Access
HEPA
2 Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill,
press the button, and pull
the grill away from the
vacuum. Remove and
rinse the HEPA filter.
s h a r kc l e a n . c o m
20