Maintenance; Emptying The Dust Cup - shark Lift-Away NV800C Serie Instructions

MAINTENANCE

To keep your vacuum's
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing.
Hand wash with
water only to prevent
damage from cleaning
chemicals. Allow ALL
filters to dry completely
before replacing in
the vacuum to prevent
liquid from being drawn
into electric parts.
IMPORTANT: Do not use
soap when cleaning the
HEPA filter.
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFF680
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF680
Clean once a year.
19
1-800-798-7398
STEP 1

EMPTYING THE DUST CUP

1
Pull up on dust-cup
release latch and lift dust
cup off pod.
STEP 2
2 Hold dust cup over a trash
bin and press the latch
on the bottom of the dust
cup to empty it.