Assembly; Settings; Cleaning Modes - shark DuoClean HZ500EU Serie Instructions

(Click)
1. Insert Wand into Floor Nozzle.
3. Ensure all connections click securely into
place.
40 sharkclean.eu

ASSEMBLY

1
(Click)
2. Insert Handheld Vacuum into wand.
3
2
POWER BUTTON
Press the power button
to begin vacuuming. To
turn off power, press
button again.
NOTE: Select Carpet for stuck-on dust and debris.
FLOOR MODE
To clean floors, place foot on floor nozzle
and tilt handheld vacuum back.
ABOVE-FLOOR HANDHELD
NOTE: All accessories are compatible with both the wand and the handheld vacuum.

SETTINGS

HARD FLOOR SETTING CARPET SETTINGS
HARD Floor/Small Area Rugs Carpet
The brush-rolls spin slowly The brush-rolls spin
to clean bare floors and faster to pick up debris
small area rugs. below the surface
of your carpets.

CLEANING MODES

ABOVE-FLOOR WITH WAND
Detach the wand for more reach to clean
ceilings, skirting boards, window sills, and other
hard-to-access areas. To disconnect the wand,
stand the vacuum upright. Step on the foot
pedal on the side of the nozzle, then pull the
wand out of the nozzle.
To use in Hand Vac mode, press the Wand Release
button and lift the handheld vacuum off the wand.
Great for cleaning stairs, furniture, and countertops.
sharkclean.eu 41