Rauch KUHN MDS URS QUANTRON-A Mode D'emploi page 67

Conversion kit MDS
05.7. Screw in the piston rod until
reaching a stop.
To this end, turn the piston rod
clockwise.
05.8. Turn the piston rod back by one
half of a turn.
This way, the piston rod is no
longer positioned on the limit
switch of the actuator.
05.9. Insert the actuators on both sides
and secure each of them using a
retaining washer.
Guide the cable downwards.
Legend
a) Actuator
b) Locking washer
a
b