Publicité
Les langues disponibles
Les langues disponibles
Conversion kit MDS
02. Before you begin
02.1. Park the machine according to
the operating manual and
disconnect it completely from
the tractor and the electrical and
hydraulic connections.
02.2. Switch off the engine of the
tractor and remove the ignition
key.
n WARNING
Risk of crushing and shearing due to uncoupled mineral
fertiliser spreader
If the return spring is tensioned when the set screw is loosened
(slide actuators K and R), the stop lever may hit the end of the
guide slot.
There is a risk of crushing, shearing and other injuries.
► Always park the machine with the metering slide completely
open (return spring is released).
► Never put your fingers in the guide slots of the application
rate setting device.
Publicité
