Rauch KUHN MDS URS QUANTRON-A Mode D'emploi page 66

Conversion kit MDS
05.4. Lay the cable and screw on the
pipe clamp.
Tightening torque: 15 Nm
Legend
a) Washer 17 x 8.4 x 1.6
b) Nut M8
05.5. Insert the right and left bearing
pin into the respective elongated
hole.
05.6. Manually position a washer and a
hexagonal nut on the bottom
side.
Legend
a) Nut M10
b) Washer 10.5 x 30 x 2.5
a
a
b
b