Rauch KUHN MDS URS QUANTRON-A Mode D'emploi page 72

Conversion kit MDS
07.4. Move the stop lever towards the
respective metering slide.
There may be no clearance
between both components.
07.5. Connect the guide to the slide.
There may be no clearance
between the guide, the stop lever
and the metering slide.
07.6. Screw both guides to the metering
slides.
Tightening torque: 15 Nm
Legend
a) M8 x 25 hex cap screw
b) Washer 17 x 8.4 x 1.6
c) M8 hexagonal nut
a
b
b
c