Installing The Actuator - Rauch KUHN MDS URS QUANTRON-A Mode D'emploi

Conversion kit MDS

05. Installing the actuator

05.1. Screw the switch box onto the
central panel from below.
Tightening torque: ≈ 7 Nm
Legend
a) Washer 6.4 x 12.5 x 1.6
b) M6 x 20 round-head screw or
lens head screw
c) Nut M6
05.2. Viewed in the direction of travel,
unscrew the right round-head
screw from the panel.
05.3. Press the pipe clamp together.
Legend
a) Pipe clamp Ø13, B20
b) M8 x 25 round-head screw
b
a
c
a
b