Publicité
Les langues disponibles
Les langues disponibles
Conversion kit MDS
10. If a slide was partially open during calibration
10.1. Loosen the nut at the bearing pin.
Metering slide is externally operated
Risk of shearing and crushing! You may loose limps!
► Switch off the engine of the tractor and/or the hydraulic unit.
► Remove the ignition key.
► Switch off the QUANTRON-A and disconnect it from the
spreader
► Park the spreader according to the operating manual.
► Completely disconnect the spreader from the tractor and/or
from the hydraulic unit.
► Observe the operating manual of the spreader, in particular
the chapter "Safety"!
n DANGER!
Publicité
