Installing the housing
This section describes how to install the housing on
the wall bracket or on the Pan & Tilt head.
1.
Sunshield assembly: between the sunshield and
the flanges of the housing, position the spacers
supplied. Then, fasten the sunshield to the
h o u s i n g w i t h t h e s c r e w s s u p p l i e d ,
corresponding to the spacers (Fig. 6).
2.
Mount the housing on the wall bracket (Fig 8) or
on the Pan & Tilt head bracket (Fig 7).
TECHNICAL SPECIFICATIONS
Housing
-External dimensions:
-Internal dimensions:
-Weight:
-Material:
-Weatherproof:
Heater
-Power supply:
-Temperature ON:
-Temperature OFF:
Certifications
-Electrical safety (CE):
-Electromagnetic compatibility (CE):
-IP protection degree:
-EAC certification
4
228x211x720 mm / 9x8.3x28.3 in
(with sunshield)
116x116x562 mm / 4.5x4.5x22.1 in
(max. lenght)
116x116x477 mm / 4.5x4.5x18.7 in
(with circuit, Fig 4)
116x116x473 mm / 4.5x4.5x18.6 in
(with circuit, Fig 5)
13 Kg
Stainless steel AISI 316
IP67
12VDC-24 VAC, 20 W
110-240 VAC, 40 W
< 15°C ± 3°C
< 59°F ± 5°F
> 22°C ± 3°C
> 72°F ± 5°F
EN60065, EN62368-1
EN50130-4, EN61000-6-3
EN60529 (IP66/IP67, with cable glands)