Table des Matières
Publicité
*
*
>
6
4-10
50
All manuals and user guides at all-guides.com
5-8
*
+
10
Operation
5.4.3
Reading positions for various Alu
types
Fig. 5-8 shows the corrected reading positions of the
gauge head (1), depending on the required weight
application positions (2); adhesive weights and clip-
on weights.
Note:
The AluP modes are included in the Easyalu
function. It is possible to switch between the ALU P
modes available, but not between ALU P and ALU
not P.
>
Select the menu key Easy Alu Toggle to recall the
required ALU P weight positions.
Fig. 5-8
—
= Point of application of gauge arm (1)
= Given weight position (2)
Normal Normal weight and clip-on weight positions
on the rim fl ange - this mode is presented
immediately by the Easyalu function.
Alu 1
Adhesive weights applied symmetrically to the
rim fl anges with NOMINAL weight positioning.
Function not included in Easyalu mode. After
reading, to set the mode press once on the
key "
*
" (6, Fig.4-10), or "
Alu 1P Adhesive weights - Adhesive weights on bead
seats; the planes are precisely read
Alu 2
Adhesive weights - Adhesive weight on rim
fl ange, adhesive weight hidden in rim disc with
NOMINAL positioning.Function not included in
Easyalu mode. After reading, to set the mode
press twice on the
Alu 2P Adhesive weights - Adhesive weight on rim
fl ange, adhesive weight hidden in rim disc; the
compensation planes for the adhesive weights
are read precisely using internal calibration.
Alu 3
Clip-on weight on left rim fl ange, adhesive
weight hidden in rim disc. Function not
included in Easyalu mode. Weight positioning
is NOMINAL. After reading, to set the mode
press 3 times on the
Alu 3P Clip-on weight on left rim fl ange, adhesive
weight hidden in rim disc; the compensation
planes for the adhesive weight is read
precisely using internal calibration.
Alu 4
Balance clip fi tted on left rim fl ange, adhesive
weight attached to right bead seat. After
reading, to set the mode press 4 times on the
*
key (10, Fig.4-10)
Alu 5
Balance clip fi tted on right rim fl ange, adhesive
weight attached to left bead seat. After
reading, to set the mode press 5 times on the
key (10, Fig.4-10)
*
>
" (10, Fig.4-10).
*
key (10, Fig.4-10).
*
key (10, Fig.4-10)
.
Publicité
Table des Matières
