Sony SU-WL850 Informations D'installation page 9

3
Attach the Wall-Mount
Attachment
VS
the TV or LCD Monitor) to the
rear of the TV or LCD Monitor (to
make it parallel with the wall).
VS
Note
 Be sure to fasten the Wall-Mount Attachment
VS
when attaching them to the TV or LCD
Monitor.
Use only a flat head screwdriver to install the
Wall-Mount Attachment
might result in over torqueing the Wall-Mount
VS
Attachment and damaging the TV or LCD
Monitor.
4
Attach .
WM3
WM3
Note
WM3
 Do not attach
5
Attach to the TV or LCD
WM2
Monitor using
WM2
(supplied with
1.5 N·m
{15 kgf·cm}
VS
. Use of another tool
on the labels.
.
M6
M6
− 9 (GB) −
6
Detach the Table-Top Stand from
the TV or LCD Monitor.
The following illustration is an example of
the operation.
Except KD-75X82K / 65X82K / 55X82K,
XR-75X94K / 75X93K / 75X92K / 75X90K /
65X94K / 65X93K / 65X92K / 65X90K /
65X90BK / 55X94K / 55X93K / 55X92K /
55X90K / 55X90BK, XRM-75X90K / 65X90K /
55X90K
• Remove one side of the Table-Top Stand
at a time. Firmly hold the Table-Top Stand
securely with both hands while the other
people lift up the TV or LCD Monitor.
• Repeat the previous step and remove the
other side of the Table-Top Stand.
GB