Installation And Connection - Bartscher PETIT Mode D'emploi

WARNING! Risk of injury!
Hot oil splashes and fat explosions respectively may cause burns at hands and face!
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with that
of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!

5.2 Installation and connection

•
Unpack the unit and remove all packing material.
•
Place the unit on a flat, stable surface that can support its weight and prevents the unit
from tipping.
•
Never place the unit on a flammable surface (e.g. tablecloth, carpet, etc.).
•
Do not place the unit near an open flame, electric oven, oven, or other heat source.
•
Avoid places where water is carried.
•
Remove the cover, then remove the basket, oil chamber and remaining equipment from
the unit.
•
Remove the fuse box from the unit by raising it until a „click" sound is heard.
•
Grab the oil chamber with both hands and carefully remove from the unit.
•
Wash the cover, oil chamber, basket and casing with a mild washing-up liquid. Take
care to ensure no water gets into the fuse box and electrical systems. Dry the unit with
the utmost care!
•
The outlet to which the unit is connected must be secured to a minimum of 16A.
Connect the unit directly to a grounded socket; do not use extension cords nor
multiple-plug sockets.
•
Place the unit so that the plug is easily accessible, so that if necessary the unit can be
quickly disconnected from its power source.
All manuals and user guides at all-guides.com
- 25 -