Installation And Operation; Installation - Bartscher 370037 Mode D'emploi

5. Installation and operation

5.1 Installation

CAUTION!
Any installation, connection and maintenance work related to the device may be
performed by the qualified and authorised technician only, according to the
valid international, national and local regulations.
Positioning
•
Unpack the device and remove all packing material.
CAUTION!
Never remove the rating plate and any warning signs from the device.
•
Put the device on an even, stable, dry and waterproof surface which is resistant to
high temperature.
•
Never place the device on the flammable surfaces.
•
Never place the device in humid or wet environment.
•
The surface on which the device is placed must be easily accessible and sufficiently
large. To enable easy operation of the device and ensure proper air circulation, leave
the space of at least 10 cm at the back and on the sides of the device and at least 50
cm from the top and in front of it.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device (see
rating plate). Connect the device only in case of compliance!
•
The device is equipped with the connection cable of H07RN-F 5x2.5mm
•
Place the power cord in such a way as to prevent its exposure to temperature
exceeding 50 ° C.
•
The electrical circuit in the socket must be secured to at least 16A.
•
We recommend a CEE16A/400 V socket.
2
type.
- 25 -