Installation And Connection - Bartscher MINI II Mode D'emploi

•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
•
Do not use the device in case it does not function properly, has been damaged or
dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•
Do not move or tilt the device when in operation.
•
During operation of the unit your hands, the mains plug and the switch must be dry.
•
Do not leave the unit unattended during operation since there might occur malfunctions
which could result in overheating of the oil (fat). In case of high temperatures oil (fat)
might ignite.
•
You may not use moisten frying goods. Always remove the extra ice from deep
frozen goods first. Even the smallest water drops may cause oil splashes or lead to
explosions during frying.
NOTE!
Overly wet foodstuffs or too large a quantity of food causes excessive foaming
of oil during frying.
•
Do not leave any frying goods in the basket hanging over the container with the hot oil.
•
The fryer may not be moved or repositioned as long as the oil is hot. The oil must cool
down first. Risk of injury! Hot oil splashes and fat explosions respectively may
cause burns at hands and face!

5.2 Installation and connection

•
Discard the complete packing material after unpacking the device.
•
Put the device in a safe place that can support its weight and is not heat sensitive.
•
Not at any time you should place the device on top of an inflammable surface.
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Never place the device at the edge of a table to avoid accidents.
•
Never put the device in a moist or wet area.
- 25 -