Cleaning And Maintenance - Bartscher FE-30 Notice D'installation Et D'emploi

CLEANING AND MAINTENANCE

ATTENTION! The device cannot be cleaned by direct or pressure water. Clean it daily. Daily maintenance keeps
longer useful life and ef¿ ciency of the device. Before cleaning make sure to have disconnected the device from
electricity. Always switch off the main feeder to the device. Stainless parts wash with moist cleaning cloth and
detergent without groove parts than dry it by the cloth - mainly around the regulation knob, main switch, cable
bushing, feeding cable, microswitch and ¿ t-on listel. Do not use abrasive and corrosive detergents. How to clean
heating elements - take out the box with heating elements. Clean the heating elements only with moist cloth.
How to discharge the oil - take out the bown with the aid of handles on the sides. Do this only when the oil is cold.
You can wash the bowl in the dishwasher. After washing it dry it with cloth and ¿ ll it with ¿ ltrated or new oil.
WHAT TO DO IN CASE OF BREAK-DOWN
Switch off the electric feeder and call seller´s proffesional service.
INDICATION
Guarentee does not cover all consumption parts succumable to common wear (rubber seals, bulbs, glas and
plastic parts etc.). The guarantee does not refer to the devices which were not instaled in correspondance with
instructions - by quali¿ ed worker, in con¿ rmity with standards and when somebody handled incompetently the
device (interventions into inner equipment) or the device was operated by nonquali¿ ed staff or at variance with
instructions for use. Guarantee does not also cover the damages caused due to inÀ uance of nature or other
outer intervention.
6