Technical Data - Gesipa FireBird Pro S Mode D'emploi

2.4

Technical data

Weight
Max. setting stroke
Drive unit
Traction power
Noise emission
Vibrations
2.5 Equipment / accessories
Threaded mandrels and nosepiece
for FB Pro S
for FB Pro S GE
Tool
Suspension loop
Battery charger
Battery (quick-change)
3. Start-up
Prior to operating the riveting tool, you must choose the correct nosepiece and threaded man-
drel that are suitable for the nut dimensions.
3.1 Changing the threaded mandrel (Fig. 3)
• Remove the battery from the tool
• Loosen lock nut C using double open-ended spanners (WAF 24/27)
• Unscrew nosepiece B.
• Push back slide G as far as it will go.
• Unscrew threaded mandrel A
• Screw in the suitable threaded mandrel. Align the surfaces of the hexagon on the
screwed-in threaded mandrel A with the surfaces of the hexagon of slide G.
• Secure nosepiece B which is suitable for the thread dimensions with lock nut C.
All manuals and user guides at all-guides.com
2.4 kg incl. battery
10 mm
Brushless direct current motor
15 kN for FB Pro
20 kN for FB Pro GE
L 76,5 dB (A), Measurement uncertainty K = 3 dB
pa
< 2,5 m/s², Measurement uncertainty K = 1,5 m/s²
M6 in working position
M4, M5 in the nosepiece holder
M10 in working position
M8, M6 in the nosepiece holder
Hexagon screwdriver WAF 4
2 double open-ended spanners, WAF 24/27 and WAF 27/30
Concealed in housing
100-240 V ~ / 50-60 Hz
18,0 V; 2,1 Ah
GB
21