Using As An Audio Interface; Preparation; Connection; Monitoring - Tascam DR-07X Mode D'emploi

Using as an audio interface

By connecting this unit to a computer (Windows/Mac) or iOS
device, you can use it as an audio interface.

Preparation

1.
Use a USB cable to connect the unit to a computer,
and turn the unit on.
micro-B USB plug
Computer
USB
The USB CONNECT screen will open.
NOTE
i With Windows, an ASIO driver for the DR-X series can be
used. Check the page for this product on the TASCAM
website (https://tascam.com/us/) for details.
i With a Mac, the standard OS driver will be used, so there
is no need to install any software.
i If the connected device type is iOS, this unit will operate
on batteries.
i Lightning to USB Camera Adapter, for example, is
necessary to connect to an iOS device.
2.
Use the + and − buttons to select AUDIO I/F, and
press 7.
The AUDIO I/F screen will open.
12
TASCAM DR-07X

Connection

1.
Select the type of connected device.
Options: PC/Mac (default), iOS
NOTE
When PC/Mac is selected, the unit with operate on bus
power from the computer.
2.
Set the sampling rate.
Options: 44.1k, 48k (default)
3.
Select Exec at the CONNECT item.
When the unit connects with the external device, the USB
AUDIO I/F screen will open.

Monitoring

1.
Press the MENU button.
The MENU screen will open.
2.
Selecting the monitored signal.
Options
PC/Mac (default): Monitor the playback sound from the
PC or Mac.
DIRECT: Monitor the input sound without latency.
NOTE
i The meters can be used to check the playback sound of
the external device.
i Sound will not be output from the speaker.
i Use headphones to hear the sound.

Disconnecting

1.
Press the MENU button.
The MENU screen will open.
2.
Select Exec at the DISCONNECT item.
The recorder disconnects from the external device, and the
Home screen opens.