First Time Setup - Philips SmartSleep Manuel D'utilisation

First Time Setup

Read all provided instructions for use before proceeding.
1. Remove the SmartSleep headband, USB cable, and charger from the box. The
SmartSleep device will arrive partially charged, but not charged enough for the first
night of use.
2. Connect the USB cable to the charging port on the device and the charger. Then, plug
the charger in to a wall outlet to charge for 2-3 hours. The indicator light will display
a pulsing orange light while charging and change to solid green when charging is
complete. The status indicator light will turn off and the device will enter power-save
mode 30 minutes after charging is complete.
Note
When charging the device, make sure the USB cable and charger are easily
accessible. The power button cannot be used to turn the device off while it is
charging. Unplugging the charger from the wall outlet is the only way to turn the
device off during charging.
Using the optional mobile application:
3. Download the SleepMapper application from the App Store or Google Play.
4. Follow the instructions on your screen to complete your registration.
5. While the device is still plugged in and charging, follow the instructions in the
application to pair your device. Your SmartSleep device will be automatically
detected by the app.
Notes
The status indicator light will turn off 30 minutes after charging is complete. If
this happens, press the headband power button for 1 second to "wake" it before
syncing.
Make sure Bluetooth® is turned on on your phone.
6. After the headband has finished charging, remove the USB cable and charger before
each use.
6
Caution
Do not connect to a computer to charge the device as it may
cause damage.
SleepMapper Icon