Component Replacement:
Replacement parts and accessories may be purchased on our website:
www.philips.com/store.
Do not use each SmartSleep Sensor more than 3 nights because it could affect device
performance. The SmartSleep Sensor is considered a disposable component and should
be replaced at least every 3 nights.
Note
The gel in the middle of the SmartSleep Sensor is very important to its function.
If the gel becomes dislodged, discard the sensor and use a new one.
Routine Service
There are no user serviceable components in the SmartSleep device.
Device Firmware Version
To check your device's current firmware version and update if necessary:
1. Open SleepMapper on your mobile device.
2. Navigate to the "My devices" screen by opening the "... More" tab, selecting "My
devices" (SmartSleep), and selecting the "My devices" screen.
3. If an update for your device is available, it will be indicated on the "My devices"
screen.
4. To update your device, select "SmartSleep update." Then, click the "Update" button.
13