Philips SmartSleep Manuel D'utilisation page 4

Masquer les pouces Voir aussi pour SmartSleep:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Unplug this device before cleaning.
Always attach the USB cable and charger to the device first, then to a power outlet.
Do not use SmartSleep if your room temperature is warmer than 35°C (95°F). If
you wear SmartSleep in excessively warm environments, the device may cause
irritation or injury to your skin.
The battery used in this device may present a fire or chemical burn hazard if
mistreated. Do not disassemble, expose to temperatures above 60°C (140°F), or
incinerate.
Portable and mobile RF communications equipment can affect Medical
Electrical Equipment.
While charging or using the device, do not place it on top of or next to any other
electrical equipment as it may affect performance of the device or equipment.
This device is considered medical electrical equipment and needs to be used in
accordance with the EMC information provided in this manual.
Only use the USB cable and charger provided with your device. Use of a USB
cable and charger not approved by Philips may cause overheating, damage
to the device, increased emissions or decreased immunity, or affect EMC
performance and should be avoided.
Do not stop any of your prescribed medicines while using the device.
When charging, always ensure that the USB cable and charger is securely
connected to both an AC outlet and the device's power inlet to prevent arcing.
Do not use extension cords with this device, and do not connect to a computer
to charge the device as it may cause damage.
Keep the USB cable and charger away from heated surfaces.
Never drop or insert any object into any opening.
The device is not designed to work as indicated when the USB cable is
connected. The USB cable is only to be used for charging.
Do not use the device in the presence of a flammable anesthetic mixture
in combination with oxygen or air, in the presence of nitrous oxide, or in an
oxygen-enriched environment.
Do not use if there is any skin irritation, inflammation, or redness.
SmartSleep sensors may pose a choking hazard. Do not let children handle the sensors.
Children should be supervised to ensure they do not play with the device.
Close supervision is required when this device is used by, on, or near children, or
persons with limited physical, sensory, or mental capabilities or invalids.
Cautions
Do not use or store this device outside of the specified environmental conditions
listed in this manual.
This device contains a lithium ion battery. It is important to dispose of this
device in a safe manner in accordance with local regulations.
If you do not intend to use the device for several weeks, it is important that you
fully charge the device before storing.
Condensation may damage the device. If the device has been exposed to either
very hot or very cold temperatures, allow it to adjust to room temperature
(operating temperature) before using the device. Do not operate the device
outside of the operating temperature range shown in the Specifications section
later in this manual.
4

Publicité

Table des Matières
loading

Table des Matières