What To Expect - Philips SmartSleep Manuel D'utilisation

What to Expect

• After headband set up, the green light will stay on for 1 minute, then turn off.
The headband is still working and connected.
• How to check that the headband is still working and connected:
Press the power button for 1 second and view the indicator light in a mirror or
hear the beeping.
• The headband and app are not connected during use.
The headband and app do not communicate with each other during the night.
Your phone could be turned off completely and the headband would still
function normally. The Bluetooth on the headband will not be functioning
until you remove it and sync your data in the morning.
• During sleep, you will not notice the tones.
The volume of the tones are specifically calibrated to you, and will play more
quietly if they are disturbing your sleep. You should not expect to hear or
notice sounds during sleep.
• If you get up in the middle of the night, no action is required.
The device will continue to function normally. Simply, go back to sleep when
you are ready.
In the Morning
1. Unsnap the SmartSleep Sensor connector from behind your ear and lift the
headband off of your head.
2. Remove the SmartSleep Sensor from behind your ear. If the gel is still present and
the sensor is still sticking well, you can place the sensor back on the card and reseal
the pouch. Otherwise, discard it.
3. Connect the USB cable to the charging port on the device and the charger. Then, plug
the charger in to a wall outlet.
Notes
This step is important. It ends your sleep session so that you can sync your sleep
data with the app, and ensures that the headband is charged and ready to use
for the next night.
You should charge your headband after each sleep session.
10
Caution
Do not connect to a computer to charge the device as it may
cause damage.