Valor LX1 Serie Manuel page 3

Installation
Dimensions
10-7/16"
[265 mm]
Stud
OPTION 1 ONLY:
2-1/2"
[64 mm]
Minimum clear-
Separation allowable here - the
ance to ceiling
top enclosure may be installed
higher up the wall to increase
overall installation height
84-7/16"
[2145 mm]
Minimum TOTAL installation
height (from feet), with top and
middle enclosures touching
42-13/16"
[1087 mm]
46-3/4"
[1188 mm]
(to wall)
HeatShift Canopy Kit
WARNING
This kit REQUIRES a minimum 2-1/2" [64
mm] gap between the top of the kit and
the ceiling if Option 1 is used (see page
2) . DO NOT SEAL THIS GAP CLOSED.
Base/pedestal NOT required
or included with this kit.
Installer can install a combus-
tible or non-combustible base
below the fi replace if desired.
18-1/2"
[470 mm]
3