Valor LX1 Serie Manuel page 9

Installation
14. Attach the middle en-
closure to the support
frame (3 screws).
Place and attach middle
assembly to the top of
the support brackets (6
screw), and to the wall
studs (8 screws).
See "Finishing Materi-
als" on page 10 to
complete installation.
Placing the Grille
AFTER applying fi nishing materials over the kit and
fi replace, insert the grille into the opening and attach
using 2 screws. The tabs attached to the grille face will
meet the two tabs supplied inside the top enclosure.
Option 2 - Front Grille
9