How To Reverse The Door - Brandt BFC7650SW Manuel D'instruction

How to reverse the door

Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It's better that 2 people handle the unit during assembly.
1. Remove four screws in top cover and then lift it.
2. Unscrew top hinge and then remove upper door and place it on
soft pad to avoid scratch
3. Remove the pin with a screwdriver and flip the hinge bracket.
Then refit the pin to hinge bracket.
4. Unscrew middle hinge. Then lift lower door and place it on a soft
pad to avoid scratch.
5. Move the hinge hole covers from let side to right side.
All manuals and user guides at all-guides.com
unscrew