Reversing The Door Opening Direction - Brandt TF12700 Guide D'installation Et D'utilisation

REVERSING THE DOOR OPENING DIRECTION

It is possible to reverse the door opening
direction (left instead of right):
The appliance must always be
disconnected when you change the
opening direction.
1. Remove the top of the fridge: remove
the 2 screw covers on the top, remove
the 2 screws and slide the top forward.
2. Tilt the appliance slightly towards the
rear and wedge it in this position.
3. Unscrew the door hinge screws and
remove the hinge pin support.
REVERSING THE ICE-BOX DOOR DIRECTION
You can also reverse the opening direction of the ice-box door:
The appliance must always be
disconnected when you change the
opening direction.
1. Slightly open the ice-box door.
2. With a screwdriver, gently press up on
the door lower hinge housing spring,
and entirely remove this hinge with the
door.
3. Switch the blocking cover (M) to the
other side.
4. Slightly open the door and lower it out
of its hinge.
5. Unscrew the upper pin and screw it in
on the opposite side. Insert the door
into the pin and close it.
6. Firmly screw the hinge pin support onto
the opposite side.
4. Rotate the door through 180° and insert
the lower hinge in the lower housing.
5. Slightly raise the door and insert it into
the upper housing, while inserting the
lower hinge in the square orifice. Slight
upwards/downwards movements will
make this easier.
6. Before switching back on, clean the
appliance.
17