Brandt BFC7650SW Manuel D'instruction page 34

6. Unscrew bottom hinge. Then remove the adjustable feet from
both side.
7 Unscrew and remove the bottom hinge pin, turn the
bracket over and replace it.
8 Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet. Transfer the lower door to the property position.
9 Detach the Fridge and the Freezer door gaskets and then attach them
after rotating.
10 Make the middle hinge reverse the dlrectlon180°C, then transfer
it to the left property position. Make the middle hinge pin in the upper
hole of the lower door, then tight the bolts.
11 Place the upper door back on. Ensure the door ls aligned
horizontally and vertically so that the seal are closed on all sides
before finally tightening the top hinge. Then inert the hinge and screw
it to the top of the unit.
12 Put the top cover and then screw back
All manuals and user guides at all-guides.com
Note: remove this screw if it presents.
unscrew
Screw