Transportation And Changing Of Installation Position; Repositioning The Door; Before Calling Your After Sales Service - Brandt BFD561YNW Guide D'utilisation

TRANSPORTATION AND CHANGING OF INSTALLA-
PART- 5.
• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick package, bands or strong cords and follow
the instructions for transportation on the package for re-transportation.
• Remove
accessories, vegetable bins etc.) or fix
them into the fridge against shocks using
bands during
transportation.
• Carry your fridge in the upright positio.

Repositioning the Door

• It is not possible to change the opening direction of your fridge door, if the door
handles on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any
handles.
• If the door opening direction of your fridge may be changed, you should contact the
nearest Authorized Service to have the opening direction changed.
PART- 6.

BEFORE CALLING YOUR AFTER SALES SERVICE

If your refrigerator is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or
when a problem occurs in the appliance. Warning codes are displayed in the Freezer and
Cooler Indicators.
ERROR CODE MEANING
SR
warnings
LV
movable parts
re-positioning
It appears when one or
Fault several parts of the fridge
fail or a problem occurs on
the cooling system.
Fridge switches to stand-by
Low condition when the voltage
voltage supply is lower than 170
Volts.
TION POSITION
(shelves,
and
CAUSE
EN - 43 -
ACTIONS TO BE TAKEN
Contact the nearest authorized
technical service as soon as
possible.
This feature prevents damage
to the com pressor due to low
voltage. Fridge will start
operating autom atically when
the supply voltage reaches the
desired level.