Replacing The Light Bulb; Transportation And Changing Of Installation Position; Repositioning The Door - Brandt BFT511MSW Guide D'utilisation

Replacing The Light Bulb

When replacing the light of the refrigerator compartment;
1. Unplug the unit from the power supply,
2. Press the hooks on the sides of the light cover top and remove the light cover
3. Change the present light bulb with a new one of not more than 15 W.
4. Replace the light cover and after waiting 5 minutes plug the unit.
PART- 4.

Transportation and Changing of Installation Position

• The original packages and foamed polystyrene (PS) can be concealed if required.
• In transportation the appliance should be tied with a wide stripe or a strong rope. The
rules written on the corrugated box must be applied while transporting.
• Before transporting or changing old
installation position, all the moving
objects (ie,shelves,crisper...) should be
taken out or fixed with bands in order to
prevent the shake.

Repositioning the door

• It is not possible to change the opening direction of your refrigerator door, if the door
handle on your refrigerator is installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any
handles.
• If the door opening direction of your refrigerator may be changed, you should contact
the nearest Authorised Service to have the opening direction changed.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
EN - 25 -